Up to 70% OFF for Vapesourcing Clearance Sale
by Everzon.com at 05-18-2020, 03:21 PM
VOOPOO Replacement PNP Tank is designed for Voopoo Drag X 80W Mod Pod Kit and Voopoo Drag S 60W Mod Pod Kit 2500mah. VOOPOO PNP Tank, made of PCTG & stainless steel, comes with 4.5ml magnetic suction pod with most sanitary way of filling oil. VOOPOO PNP pod adopts infinite airflow system and is compatible with all PnP coils including RBA.
[Image: voopoo_pnp_pod_tank_for_drag_x_drag_s_kit.jpg]

Parameters:
Size: 26* 50mm
Material: PCTG & stainless steel
Capacity: 4.5ml
Resistance: 0.15ohm PnP-VM6 mesh coil(60-80W)
0.3ohm PnP-VM1 mesh coil(32-40W)
[Image: voopoo_pnp_pod_tank_for_drag_x_drag_s_kit-.jpg]

Features:
Compatible with all PnP coils including RBA
Bottom filling design
Innovative infinite airflow system
[Image: voopoo_drag_x_drag_s_replacement_pnp_tank1.jpg]
Packages:
1* PnP Cartridge
1* PnP-VM1, 0.3ohm
1* PnP-VM6, 0.15ohm
1* User Manual


--------------------
You may like:
1. Voopoo Drag X 80W Mod Pod Kit

2. Voopoo Drag S 60W Mod Pod Kit 2500mah

3. Voopoo PNP Coils for Drag Series and VINCI Series 5pcs

4. Voopoo PNP RBA Coil for Drag Series and VINCI Series
by Everzon.com at 05-18-2020, 01:59 PM
Hello guys,
Steam Crave released one flavor and cloud beast: Steam Crave Aromamizer Ragnar RDTA 35mm,which is a self-winding tank atomizer with a diameter of 35mm. It is not suitable for all box mods, but it can achieve very good results on internal models,such as Steam Crave Hadron 220W Box Mod with Yihi SX490 or Steam Crave Titan PWM MOD. There are 3 colors for your choice.
[Image: steam_crave_aromamizer_ragnar_rdta_2_.jpg]
Steam Crave Aromamizer Ragnar features adjustable smooth bottom and side airflow for medium or high power vaping. Aromamizer Ragnar adopts postless deck with bottom honeycomb air holes. Aromamizer Ragnar RDTA is compatible with Steam Crave Aromamizer plus decks for different DIY fun.
It supports 80% side airflow and 20% bottom airflow. Therefore, you can make the best adjustment according to your needs. The 810 Wide Bore drip tip with a diameter of 22mm is made of resin and has a stylish honeycomb design that fits perfectly with the Aromamizer Ragnar RDTA.
[Image: steam_crave_aromamizer_ragnar_rdta_3_.jpg]

Parameters:
Size: 35* 58mm
Material: SS & Glass
Capacity: 18.0ml
Drip tip: 810 drip tip
Thread: 510
[Image: steam_crave_aromamizer_ragnar_rdta_35mm.jpg]

Features:
Smooth bottom and side airflow for medium or high power vaping
Adjustable bottom airflow
Postless deck with bottom honeycomb air holes
Perfect match with Hadron 220 Mod
Compatible with Steam Crave Aromamizer plus decks(sold seperate)
[Image: steam_crave_aromamizer_ragnar_rdta_4_.jpg]
Packages:
1* Aromamizer Ragnar RDTA
1* Replacement 18ml Glass
1* Steam Crave Sticker
1* Chamber Reducer
1* User Manual
1* Allen Key
1* Spare Parts (O-ringsand Grub Screws, Slotted Screws)

----------------
[Image: steam-crave-hadron-220w-box-mod.html] Box Mod with Yihi SX490 

You may also like:
BOX MODS
Cheap Vape Deals
GIVEAWAYS
IN STOCK VAPE DEVICES
NEW ARRIVAL
by gearvitaid at 05-18-2020, 09:37 AM
Geekvape enters the pod mod fray with a revision of its popular Aegis design, retaining the line's signature shockproof, dustproof, and waterproof properties while making the coil and power profile suitable for pod-like performance.

Aegis Boost boasts a large internal battery with a capacity of 1500mAh, regulated by the AS Chip's suite of performance and safety features. The AS Chip keeps its near-instantaneous firing speed and is capable of delivering 5-40 watts of power--sufficient for use with both salt nic and freebase nic liquids (note: we recommend the 0.6ohm coil at a low wattage setting for use with salts).
[Image: Geekvape-Aegis-Boost-Pod-Mod-Kit-Colors.jpg] 
The pod section offers several conveniences. Coil replacement is nearly plug-and-play, and airflow control is intuitive with a simple dial. Refilling is easy with a top-fill port protected by a silicone stopper.

Geek Vape Aegis Boost 40W Pod Mod Features:
Dimensions - 106.8mm by 39.2mm by 27.7mm
Integrated 1500mAh Rechargeable Battery
Wattage Output Range: 5-40W
Voltage Output Range: 1.0-6.0V
Firing Speed: 0.08s
Zinc-Alloy, Leather, and Silicone Chassis Construction
IP67 Rating - Water, Shock, Corrosion Resistance
Single Intuitive Firing Button
Two Adjustment Buttons
0.42"" OLED Display Screen
3.7mL Refillable Pod - Replaceable Coil
PTGC Food-Grade Plastic Pod
Top Fill System - Silicone Stoppered
Rotating Airflow Control Dial
Plug 'n' Play Coil Installation
Press-To-Fit Pod Connection
Over Temperature Protection
Over Current Protection
Short Circuit Protection
Over Discharge Protection
Over Charge Protection

Includes:
1 Geek Vape Aegis Boost Pod Mod
1 0.6ohm KA1 Mesh Coil
1 MicroUSB Cable
1 User Manual

related product: aegis pod kit
by gearvitaid at 05-18-2020, 09:36 AM
Hey guys. This time let's look at the PnP Pod Tank by VOOPOO. You shouldn't miss out on it if you like vape atomizers which are versatile for kinds of uses. For vape terbaik, just check gearvita.id.

VOOPOO PnP Pod Tank is a variation of the pod used on the Drag X and Drag S kits. However, you can now buy it on its own and it can be used as a pod or a tank… Basically it has been created due to the PnP range of coils from VOOPOO. This versatile coil range fits most of their recent devices including the Vinci X, Navi, and the MAAT tank included in some of their kits. The PnP coil range (stands for Push and Pull – easy installation) is huge with even an RBA coil so you can DIY your way to a perfect vape.
[Image: VOOPOO_PNP_Tank_4.5ml.jpg]
9 PnP coil options are shown below as you can see plenty of options for every vaping style. The recent release of the Drag S and Drag X kits included this as standard and now VOOPOO has created a standalone version with a 510 base to allow it to be used on standard mods too. The base attaches to the pod and has the airflow adjustment. The Drag S/X kits have the airflow intake and control located on the mod. This is for devices that have no airflow intake such as box mods. To refill remove the base to access the bottom fill port.

You may also like: beli pozz x
by Freemaxtech at 05-18-2020, 09:07 AM
For 3 years, Freemax technician team have been working on transplanting our mesh coil technology on pod system. Finally, Freemax Maxpod Kit was born with the NS Mesh Coils. So why does it take so long? What’s the advantages of Freemax NS Mesh Coils over the other coils used in the other pod system?

[Image: a4BZZPW.jpg]

1. NS Mesh Coil 1.0ohm for Nic Salt (Best 20-30mg) & Freebase Eliquids (Best 3-12mg), you can easily have the same flavor and right amount of vapor just like the mesh coils in Freemax sub ohm tanks;

2. NS Mesh Coil 1.5ohm for Nic Salt (Best 30-50mg) & Freebase Eliquids (Best 12-24mg), you can easily notice the difference of nicotine satisfaction and throat hit with the first few vapes;

3. The compatible VG/PG Ratio of NS Mesh Coil for Nic Salt eliquids varies from 5:5 to 4:6 to 6:4 while Freebase elquids from 7:3 to 8:2 to 6:4, which means Freemax Maxpod matches 99% of flavor categories in the market;

4. 5-8 Refills for each NS Mesh Coil, considering nic content and VG/PG ratios.

More details about Freemax Maxpod NS Mesh Coils here>>https://www.freemaxvape.com/ns-mesh-coil.

Watch the unboxing video on Maxpod to win Freemax Maxpod here>>
https://www.youtube.com/watch?v=Ds0rM8760FU.
by gearvitaid at 05-18-2020, 08:48 AM
Hello guys. Lately, Vandy Vape has just released the latest Kylin M AIO Kit. In the following, I'm gonna make a detailed introduction to this pod vape. Don't miss out on it if you like.

Vandy Vape Kylin M AIO Kit is quite small for a 70W pod system. With 4 different color options, the panels look incredible. On the inside, the PCBA circuit board is waterproof to prevent damage from dust or water. Technically, it also does not disappoint. In fact, there are three different modes including VW, VV, and TCSS which permit a thorough and versatile vape experience. Power comes from a single 18650 cell stored behind one of the panels which also hides a small display screen, two adjustment buttons to navigate the menu, and a type-C charging interface. Finally, a multitude of safety protections prevents dangerous operations while vaping on the Kylin M AIO.
[Image: Kylin-M-AIO-Pod-System-Kit.jpg]
What's unique about the Kylin M AIO is that you may use it with either a 2.5mL pod that works with pre-built coils or a 5mL cartridge with a build deck for DIY fun. The package includes both pods and a number of different coils, wire, and DIY tools. Each pre-built pod comes with a pre-installed 0.3ohm single mesh that fires in the range of 35 to 45 watts, while the Kylin M RBA pod works with single mesh or standard wire. To top off the juice reservoir, all you do is open a rubber stopper that hides a decent-sized e-liquid port.

You may also like: harga osmall pod
[url=https://gearvita.id/vaporesso-osmall-kit.html][/url]
by Freemaxtech at 05-16-2020, 09:34 AM
Hi, guys, do you want to know about each part of Freemax Maxpod? Now let’s watch this unboxing video on Freemax maxpod pod system kit below:


So what are highlight features of this Maxpod vape that can attract you after watching this unboxing video:
1.99% flavor categories compatible with various VG/PG ratios of nic salt and freebase.
2.Two different vape cotton ratios used into NS Mesh Coil for either Flavor and Vapor or  Nicotine Intake & Throat Hit.
3.Freemax NS Mesh Coil is equipped with FM SaltCoilTech 2.0, preserving the original flavor while increasing the throat hit.
4.5-8 Refills for each NS Mesh Coil, considering nic content and VG/PG ratios

More details about this giveaway for Freemax Maxpod, please follow Freemax official Youtube and Instagram.
by Everzon.com at 05-13-2020, 12:41 PM
Hello guys,
Freemax released one pod kit:Freemax Maxpod Kit 550mAh, let`s check what surprised you? There are 6 colors for your choice!
[Image: freemax_maxpod_kit_550mah.jpg]

Freemax Maxpod Kit is powered by built-in 550mAh battery with 3 level LED light indicator and 3.3V constant output for higher consistency of good flavor. Freemax Maxpod, made of PCTG & Steel & Zinc Alloy, features draw-activated and fast respond mechanism within 15ms. Maxpod utilizes NS Mesh Coil with FM SaltCoilTech 2.0, honeycomb Mesh & Flax Cotton & Organic Cotton Formula, to support all sorts of e-juice with various VG/PG ratios with increasing the throat hit. Maxpod cartridge comes with 2ml tea-light color with clear e-liquid level and side filling design.


[Image: Freemax_Maxpod_Kit_550mAh_2_.jpg]
Parameters:
Size: 100.81* 21.81* 14mm
Material: PCTG & Steel & Zinc Alloy
Battery: 550mAh built-in battery
Output: 8-11W
Output voltage: constant 3.3V
Capacity: 2ml
Resistance: 1.0ohm NS Mesh Coil
1.5ohm NS Mesh Coil
[Image: freemax_maxpod_kit_.jpg]

Features:
Internal 550mah battery with 3 level LED light: Red 1-30%, Green 31-70%, White 71-100%
Exquisite IML body with brighter colors and more comfortable hand feeling
NS Mesh Coil with FM SaltCoilTech 2.0, honeycomb Mesh & Flax Cotton & Organic Cotton Formula, support all sorts of e-juice with various VG/PG ratios
Draw-activated and fast respond mechanism within 15ms
Constant 3.3V for higher consistency of good flavor
Tea-light color pod with clear e-liquid level, side filling design
Short circuit protection
Open circuit protection
Over-charge protection
Low voltage protection
8s cut-off protection
Over-discharge protection
[Image: freemax_maxpod_kit_550mah__8.jpg]
Packages:
1* Freemax Maxpod Battery
1* Freemax Maxpod Pod (Freemax NS Mesh Coil 1.0ohm Pre-installed)
1* Extra Freemax NS Mesh Coil 1.5ohm
1* Freemax Maxpod Lanyard
1* Freemax Maxpod Lanyard Ring
1* USB Cable
1* Warning Card
1* Warranty Card
1* User Manual
[Image: Freemax_Maxpod_Kit_550mAh_.jpg]

---------------------------
You may also like:
POD MOD SYSTEMS
POD KITS
Cheap Vape Deals
GIVEAWAYS
IN STOCK VAPE DEVICES
NEW ARRIVAL
by Vapesourcing at 05-13-2020, 12:23 PM
SMOK OFRF NexMesh Kit features an integrated 1200mAh Rechargeable Battery, 5-30W range, and utilizes the NexMesh Coils to produce lots of vapor for MTL or DTL vaping. Constructed from lightweight aluminium alloy, the chassis of the OFRF NexMesh Pod Kit is impervious to light falls and drops. Featuring an adjustable wattage range between 5-30W, the OFRF can be paired with a 0.4ohm coil of either kanthal or stainless steel to produce a balanced maximum flavor and vapor output. Displaying pertinent information on the 0.69" Screen, the NexMesh Pod Kit maintains a lofty 1200mAh rechargeable battery with a slew of protections to guard against failure. Connected by magnetic connection, the NexMesh Pod Kit can hold up to 2mL of eJuice within the side-filled pod and can accept coil changes from the bottom in a press fit manner.

The SMOK & OFRF nexMesh cartridge capacity is 2ml, and the side filling system is used. The waterproof design of the cartridge base prevents condensation from entering the interior.
[Image: smok___ofrf_nexmesh_pod_kit_1200mah_colors.jpg]
Parameters

Dimensions: 80.5mm(Height) x 45.0mm(Width) x 17.5mm(Thickness)
Battery Capacity: 1200mAh
E-liquid Capacity: 2ml
Output Wattage: 5W-30W
Max Output Voltage: 4.2V
Battery Internal Resistance: 0.4ohm-3ohm
Resistance: 0.4ohm for A1 nexMesh coil, 0.4ohm for SS316L nexMesh coil
Display Size: 0.69"
Colors: Silver, Gunmetal, Black, Blue, Gold, Red

Buy link: https://vapesourcing.com/smok-ofrf-nexmesh-kit.html

Other vape pod system like:
kylin m aio kit for sale
drag x voopoo for sale
by Everzon.com at 05-13-2020, 12:07 PM
Hello, friends
Today we wanna introduce to you Exvape first self-winding DL vaporizer:
Exvape Expromizer Top Coiler Meshed RDTA,which is top coiler vaporizer, e-juice from tank to the cotton wool by the capillary action of stainless steel wicks. Exvape Expromizer TCM RDTA adopts two clamping jaws deck to build mesh coil easily. Exvape Expromizer TCM comes with 25mm diameter and 7ml big capacity with side filling design. Expromizer Top Coiler Meshed RDTA features top airflow system, airflow holes at an angle on both sides, air directly to the coil. Which tank let you remind?
[Image: expromizer_top_coiler_meshed_rdta_25mm_10_.jpeg]

Parameters:
Diameter: 25mm
Material: stainless steel & glass & POM
Capacity: 7 ml
Thread: 510
[Image: expromizer_top_coiler_meshed_rdta_25mm_6_.jpeg]

Features:
The first self-winding DL vaporizer from EXvape
Top coiler vaporizer, e-juice from tank to the cotton wool by the capillary action of stainless steel wicks
Two clamping jaws deck, easy to build mesh coil
Top airflow system, airflow holes at an angle on both sides, air directly to the coil
Side filling design
Leak-proof system
[Image: expromizer_top_coiler_meshed_rdta_25mm_1_.jpeg]
Packages:
1* Exvape Expromizer Top Coiler Meshed RDTA
Spare parts


You may also like:
Vapefly Brunhilde RTA
$18.99 Snowwolf Mfeng UX 200W Box Mod
Atomizers
Cheap Vape Deals
GIVEAWAYS
IN STOCK VAPE DEVICES
NEW ARRIVAL
  •  Previous
  • 1
  • ...
  • 3
  • 4
  • 5(current)
  • 6
  • 7
  • ...
  • 312
  • Next 
Welcome, Guest
You have to register before you can post on our site.
Search Forums
Forum Statistics
Members: 327
Latest member: Juanoone
Forum threads: 4,767
Forum posts: 5,284
Online Users
There are currently 64 online users.
 1 Member(s) | 56 Guest(s)
Alexa, Alexa Internet, Applebot, Bing, Google, Twitter, Everzon.com